Best Way to Take Off House Water Filter

Can't get yourh2o filter housingopen to alter the filter? No thing how hard you attempt and how hard you button it volition non open up? Well, today you'll learn 5 techniques to go that housing open so you can change your h2o filter, and two things you tin practise to make sure it doesn't happen once more.

It seems so piece of cake, doesn't it? You lot only unscrew the filter housing, remove and replace the filter, and you're good to go, correct? Well sometimes y'all just can't get information technology unscrewed.

Here are 5 great tips from the pros to assist you out!

1. Turn your water supply off. Yous probably have a shutoff on the supply line located before the filter. If you don't, then go to the hydro panel and turn the pump off.
2. Salvage the h2o pressure level on the lines before you effort to unscrew the housing that holds the water filter. To do so, plow a faucet on inside the business firm to relieve the pressure and let the water run until it slows to a trickle. Then shut off the water after the filter housing to keep the water from the firm from draining back.
3. Identify a saucepan under the filter housing. If the housing has a relief button push that to brand sure all the pressure level is gone. Make sure that the filter housing is securely attached. Caryatid the plumbing while unscrewing the housing and take it off. Remember, you volition be turning the housing to the left..."Lefty loosey, righty tighty!"
4. If it does not come loose, y'all will demand to try the following:
   a) Using a blow dryer to heat up and aggrandize all of the exterior of the housing until it becomes noticeably warm to the touch. Then knock information technology with a hammer and remove with the filter housing wrench.
   
   
   
   b) Use 2 filter housing wrenches together, i for each paw and twist the housing with both wrenches. Discover the filter housing wrenches nosotros used most right here!
   
   
   
   c) You can sandwich two filter housing wrenches together and add pipe to give you more leverage.
   
   
   d) Use a metal filter wrench, which is stronger and longer than the typical plastic one. You can buy these on Amazon in a number of sizes. If that doesn't work, y'all tin ever add together on a piece of pipe to that wrench.
5. The last alternative I'd recommend is a Lisle Strap wrench similar the one in the video below. Yous just wrap it effectually your housing and with a ½" socket wrench, add some torque to release the filter housing. You can fifty-fifty add together a slice of piping to the socket wrench for more torque. Detect it on Amazon, here.

Once you have the filter housing removed, clean out the housing and replace the filter. BUT Start...

HERE ARE 2 WAYS TO Forbid A STUCK WATER FILTER HOUSING!

To lessen the possibility of your filter housing getting stuck once more in the future, I highly recommend you do these two things before replacing and tightening it.

1. Always make sure that y'all bank check the lesser of the filter housing for o rings left backside from the old filter before putting in the new filter.
2. Utilise some plumber's articulate silicone grease and or supercede the o band so you don't need to tighten it so much to brainstorm with to continue it from leaking. We sell this on our website because it is used often - shop it hither!

And there you accept it, friends! Retrieve, if you follow these last two steps, you lot will have an easier time replacing your water filter housing the next time.

For more than great videos on h2o filtration, troubleshooting and maintenance, click here.

← Previous Post Adjacent Postal service →

• Tags: Troubleshooting water filter housing water filters

• Dec 13, 2020
• Gary Beutler

ferronpues1963.blogspot.com

Source: https://waterestore.com/blogs/news/best-5-ways-to-open-and-2-ways-to-prevent-stuck-water-filter-housing

Share this post